Coating Selection Chart
(The Duplex process is available with all coatings)
Xcell Rose
Co-efficient Friction = 0.3 AlTiCN Layered (Pink)
Thickness = 7-9 um Therm Limit = 1450°F
Micro-Hardness = 3500 Vickers Application = High Strength Steel, Stainless Steel
Cromaxx
Co-efficient Friction = 0.3 Cr with Additives (Silver)
Thickness = 7-9 um Therm Limit = 1550°F
Micro-hardness = 3100 Vickers Application = Aluminum Die Cast, Forming Aluminum
and Plastic Injection Moulding
TiCN
Co-efficient Friction = 0.2 TiCN Layered (Blue)
Thickness = 3-6 um Therm Limit = 750°F
Micro-Hardness = 3500 Vickers Application = Piercing, Cold Forming, Forming Aluminum
.png)
Matrix
Co-efficient Friction = 0.2 Layered (Blue / Grey)
Thickness = 9-11 um Therm Limit = 1500°F
Micro-Hardness = 3500 Vickers Application = High Strength Steel, Stainless Steel,
and Forming Aluminum
OMEGA
Co-efficient Friction = 0.3 Dark Grey
Thickness = 10 um Therm Limit = 1650°F
Micro-Hardness = 3600 Vickers
ALUMAXX
Co-efficient Friction = 0.3 Dark Grey Layered
Thickness = 6-10 um Therm Limit = 1770°F
Micro-hardness = 3400 Vickers Application = Stamping / Cutting / Piercing
Al Die Cast, Hot Working
TiN Duplex
Co-efficient Friction = 0.6 TiN (Gold)
Thickness = 2-4 um Therm Limit = 900°F
Micro-Hardness = 2300 Vickers Application = Punching / Forming of iron
based materials
ALTIMAXX
Co-efficient Friction = 0.6 Purple
Thickness = 6-10 um Therm Limit = 1600°F
Micro-Hardness = 2800 Vickers Application = HOT WORKING HEAVY STAMPING
Z-MAXX
Co-efficient Friction = 0.3 Pale Yellow
Thickness = 4-6 um Therm Limit = 1022°F
Micro-Hardness = 2400 Vickers Application = Al Blanking, Cutting / Piercing
Non-Ferrous Metals
X-TND
Co-efficient Friction = 0.3 Duplex Hard Carbon
Thickness = 9-18 um Therm Limit = 1500°F
Micro-Hardness = 1200 Vickers Application = Stamping / Cutting / Al Diecast
Casting, H-13, Low Alloy
